Steel

Operation	What we do
Laser cutting	Plate up to 30 mm, including high-strength and wear-resistant steel up to 30 mm
Tube laser cutting	Tube and hollow sections, see below
CNC milling	On the 3-axis milling machine, single pieces and series
Spot welding	Sheet metal parts
TIG, MIG and MAG welding	Welder qualifications for material group 1.1 and 1.2

These steel grades we cut in plate:

Group	Grades
Structural steel (EN 10025)	S235JR, S235J2, S275J0, S355JR, S355J2
High-strength steel (EN 10149-2)	S355MC, S700MC
Thin plate (EN 10111, EN 10130, EN 10152)	DD11, DC01, DC04, ZINCOR DC01 (zinc-coated)
Wear-resistant and weathering	400 HB, X120Mn12, 42MnV7, COR-TEN A, COR-TEN B
Spring steel (EN 10132-4)	C75S

As drawn bar, for machining: C45 and 42CrMoS4 (EN 10083), and 11SMn30, 11SMnPb30, S235JRC and S355J2C (EN 10277).

Stainless steel

Operation	What we do
Laser cutting	Plate up to 30 mm
CNC milling	On the 3-axis milling machine, single pieces and series
Spot welding	Sheet metal parts
TIG, MIG and MAG welding	Welder qualifications for material group 8
Glass bead blasting	Also removes weld discolouration and the oxide skin

These stainless steel grades we process:

Material no.	EN 10088	Common name
1.4016	X6Cr17	430
1.4057	X17CrNi16-2	431
1.4104	X14CrMoS17	430F
1.4122	X39CrMo17-1
1.4301	X5CrNi18-10	304
1.4305	X8CrNiS18-9	303
1.4307	X2CrNi18-9	304L
1.4310	X10CrNi18-10	301
1.4401	X5CrNiMo17-12-2	316
1.4404	X2CrNiMo17-12-2	316L
1.4462	X2CrNiMoN22-5-3	duplex 2205
1.4541	X6CrNiTi18-10	321
1.4571	X6CrNiMoTi17-12-2	316Ti

Aluminium

Operation	What we do
Laser cutting	Plate up to 15 mm
CNC milling	On the 3-axis milling machine, single pieces and series
Spot welding	Sheet metal parts
TIG, MIG and MAG welding	Besides steel and stainless steel
Glass bead blasting	An even surface finish

These alloys we process as sheet, strip and plate (EN 485-2):

EN AW	Name
1050A	Al99.5
3105	AlMn0.5Mg0.5
5005A	AlMg1
5052
5754	AlMg3
5083	AlMg4.5Mn
6005A	AlMgSi0.7
6060	AlMgSi0.5
6082	AlMgSi1

As bar, tube and section, for machining: EN AW-1085, EN AW-6026, EN AW-6063, EN AW-7075 and AlCu6BiPb.

Tube and section

Tube and section are cut on a TRUMPF TruLaser Tube 3000, which stands at our sister company Assink & Schipholt. See tube laser cutting.

Grade	Material no.	Standard
S235JRH	1.0039	EN 10210-1
S355NH	1.0539	EN 10210-1
E235	1.0308	EN 10296
E355	1.0580	EN 10296
S195T	1.0026	EN 10255 / EN 10224

Brass and plastics

Brass and plastics are milled on the 3-axis CNC milling machine, as single pieces and in series. See CNC milling.

Your material is not listed?

Put it to us. With your enquiry, name the grade or alloy, the thickness or the dimensions of the stock, the quantities and the operations that follow. The grade often decides more than the cutting: not every material bends, welds or machines equally well.

Materials